"Dirty solar panels in high dust / pollen or desert areas can reduce their power capability by up to 30%," says Seamus Curran, Professor at Houston University.
The conversion capacity of solar panels, usually within the 20% range, is reduced by dust, grime, pollen and other particles accumulated on the solar panel after a weeks time and keeps on increasing .
HYDRASOL is a high-quality hydrophobic, self-clean, high-performance nano solar panel coating, long-lasting, easy-to-clean protective coating on all forms of solar photovoltaic panels that will also improve the energy generation of each panel. This coating can be used at industry-leading prices by our valued customers.
In the geographical areas where it is mainly rainy, it is a very time-consuming and expensive activity for daily cleaning and maintenance of solar panels installed on the top of the infrastructure which, if not performed regularly in 7~10 days, would reduce the power production. However, manual cleaning poses a high risk for cleaners employed at a height of 12 to 30 feet from the ground level and a high risk for cleaning.
Natural cleaning sources include wind and rain storms which will effectively clean the glasses encompassing the solar panel. Wind cleaning is stated as a non-feasible technique as high wind speed is needed to clear the particles from the dust and velocity may vary depending on various geographical locations and seasonal conditions. Cleaning with rain is whispered as an efficient cleaning method, but in reality, it is a low-efficiency cleaning method and if local environmental contamination is high, debris leaves over the solar panel surface after rainfall.
Mechanical cleaning mode includes the use of a robotic arm and wiper. The type of wiper cleans the glass cover of the solar panel with a device just like the windscreen-wiper for automobiles. The wiper consists of an electrostatic fabric that needs to be charged for wide-area surfaces and difficult to scale. The robot type appears to be effective in cleaning strongly adhered dust particles and large area surfaces, but it requires high operating voltage and human intervention is required to start the operation and move from one row to the next.
We propose Hydrasol as best solution to solve all of above problems
Solvent Based available
No change in IV Curves
Excellent Water Repellency
Durablity of 5+ yrs
Repels Dirt and Debris
Easy to apply
Ecologically beneficial & Biologically safe
High Cost Savings
|Appearance||Colourless , Liquid|
|Coating thickness||Less than 1 microns|
|Optical Distortion||No Distortion observed.|
|Transmission of Light 380nm to 750 nm||No Changed observed.|
|Salt Spray Test (ASTM B117)||NA|
|Curing||Room Temperature Cure|